Vinten-radamec Quattro SE Pedestal Manuel d'utilisateur

Robotic Camera Control SystemsOperators GuideQuattro-SEPedestalV3851-4980

8Regulatory informationThis product conforms to the following European Directives:2004/108/EC (Electromagnetic Compatibility Directive)97/23/EC (Press

9ContentsPagePreface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10Technical dataPayload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11UsageThe Quattro-SE Pedestal is designed for use in virtual television studios to support and balance a pan and tilt head, camera and ancillary equi

12Fig 1 Quattro-SE Pedestal(1)(2)(3)(26)(24)(25)(13)(22)(16)(12) (11)(4)(14)(15)(23)(6)(21)(5)(7)(8)(9)(17)(19)(20)(10)(11)(7)(18)(10)

13Quattro-SE Pedestal (Fig 1)(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14IntroductionThe Quattro-SE pedestal comprises a central four-stage telescopic column mounted in a steerable base.The moving column (16) is pressuriz

15OperationUnpackingUnpack the pedestal, ensuring that all transport packing and retaining fixings are removed.Column checkEnsure pedestal pressure is

16Fitting the loadThe Quattro pedestal has the standard four-bolt mounting plate (23) which permits the use of various Vinten camera mounts including

177. Install one main (22) and two auxiliary trim weights (21) on the weight tray (1).Pressurizing the pedestalThe Quattro may be pressurized from an

18Pressurizing the pedestal from an external pressure sourceTo pressurize the pedestal from an external pressure source, proceed as follows:1. Remove

19To pressurize the pedestal using the Vinten portable pump, proceed as follows:1. Remove the Schrader valve cap (5).2. On the pump (Fig 3), fold down

202. If the column tends to fall, remove a trim weight (22, 23) or increase pressure.3. If the column tends to rise, reduce the pressure in steps of 0

21Power SocketThe power cable plugs into the power socket (25.1), providing power to the pedestal from the Head Processing Module via the power plug (

22SteeringDirectional control of the pedestal is achieved by turning the steering ring (3) mounted at the top of the column. The steering system is ge

23Transportation and storageTo prepare the pedestal for transportation and storage, proceed as follows:Fully depress the moving column (16). Push down

24To avoid the possibility of dust or abrasive particles collecting on moving components, release the on-shot clamp (20) and set the moving column (16

25ServicingGeneralThe Quattro-SE pedestal is robustly made to high engineering standards and little attention is required to main-tain serviceability

26The two opto sensors (27) are located on the underside of the pedestal base (Fig 5), next to the two wheels beneath the trim weight stowage slots (7

27Changing the steering ringThe Quattro-SE may be supplied with a steering ring with either a moulded steering indicator on the top or rivets on the u

Operators GuideQuattro-SEPedestalPublication Part No. V3851-4980Issue 3 (December 2008)Original InstructionsCopyright © Vitec Group plc 2008All rights

28Parts listThe following lists include main assemblies, user-replaceable spare parts and optional accessories. For further information regarding repa

3PrefaceThank you and congratulations on your new Quattro-SEpedestal from Vinten RadamecWe want you to get the most from your new Quattro-SE pedestal,

4

5Safety - Read This FirstUnderstanding these instructionsEnglishThe original instructions presented in this operators guide were written in English, a

6LatviešuŠajā operatora rokasgrāmatā iekļautie norādījumi sākotnēji tika sarakstīti angļu valodā un pēc tam pārtulkoti citās valodās. Ja nesaprotat šo

7Warning symbols in this operators guideWhere there is a risk of personal injury or injury to others, comments appear highlighted by the word WARNING!