Vinten-radamec Quattro SE PDA Manuel d'utilisateur télécharger pdf (Page 18)

16 Quattro PDA Operators Guide

4. Adjust the position of the Quattro PDA on the pan bar handle so that camera operators can easily

view the PDA screen and access the functions using the stylus. Loosen the mounting arm adjustment

knob (2) and position the Quattro PDA, then tighten the knob to secure the PDA into the required

position.

Connecting the Quattro PDA to the HPM

The Quattro PDA is connected to the HPM that is mounted onto a bracket secured to the base of the

head. Using a combined power and data cable (5), the Quattro PDA communicates with the HPM and

is also powered by the HPM. When connected to a powered HPM, the Quattro PDA internal battery

is constantly being charged. There is no requirement to charge the PDA battery unless it has been

disconnected from the HPM and operated for several hours without an external power source (refer

to the PDA user documentation for instructions about recharging the PDA).

To connect the Quattro PDA to the HPM:

1. Connect the PDA serial connector to the Comms port on the Quattro PDA and then plug in the DC

power connector to the Power input socket. Refer to the PDA user documentation for Comms port

and power socket location.

2. Connect the HPM serial connector to the PDA Comms port on the HPM.

Powering Up

When the Quattro PDA has been installed, switch on the power to the Quattro SE pedestal, head and

HPM. Refer to the PDA user documentation for instructions on powering up the PDA.

NOTE: Mounting the Quattro PDA onto the pan bar handle will affect the fore

and aft balance of the head. Check the balance of the head after fitting

the Quattro PDA.

CAUTION! Switch off the power to the HPM, Quattro SE pedestal and the head

before connecting the Quattro PDA.

NOTE: The PDA cable has a single serial connector at one end that connects

to the HPM and a combination of serial connector and power plug at

the other end which connects to the PDA.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Pas de commentaire

Vinten-radamec Quattro SE PDA Manuel d'utilisateur Page 18